Service available now · 50 states Mon–Sun · 7AM–9PM EST

Amana Refrigerator PO — PO is the power-outage alert on an Amana refrigerator — the freezer warmed up while power was off.

Complete diagnostics and troubleshooting guide for Amana refrigerator error code Refrigerator PO. Learn what it means, what causes it, and whether you need professional repair.

Severity Low Repair DIY-friendly Components Control board, defrost heater, defrost thermostat, compressor, door gasket

Schedule Amana
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Amana specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing

Refrigerator PO at a glance.

Error code Refrigerator PO
Appliance type Refrigerator
Severity Low
Repairability DIY-friendly
Affected components Control board, defrost heater, defrost thermostat, compressor, door gasket

Understanding error code Refrigerator PO.

PO is the power-outage alert on an Amana refrigerator — the freezer warmed up while power was off.

What PO means on your Amana refrigerator (amana po error)

An amana po error is the power-outage alert on an Amana refrigerator — it means the power was off long enough for the freezer to reach about 18°F (-8°C) or warmer. PO is an alert, not a fault: it tells you the freezer briefly lost its cold so you can check the food. You clear it by pressing the MEASURED FILL pad and then Confirm. It only becomes a repair concern if PO keeps returning when there has been no actual power loss.

Symptoms

The signs below help confirm you are dealing with this condition rather than a different fault on your Amana refrigerator. You may notice one of them or several together, and they can appear gradually or suddenly after a power event, a cleaning or self-clean cycle, a spill, or recent installation or service.

  • “PO” shows on the dispenser or control display after the power blinked or was cut
  • Food in the freezer may have partly thawed
  • The alert repeats until you acknowledge it
  • On a true outage the clock or some settings may also have reset

Common causes

Several different faults can produce these symptoms. Working through the most likely causes in order separates a quick owner-level check from a problem that needs trained service and the correct Amana parts.

  • Power outage — a blackout, brownout, or tripped breaker let the freezer warm above 18°F
  • Unplugged or loose supply — the refrigerator briefly lost power at the outlet
  • Recurring PO without an outage — a defrost or cooling fault is letting the freezer warm on its own
  • Control reset — the board restarted and reports the event

Troubleshooting steps you can try

Work through these checks in order before calling for service. Stop wherever you are unsure, or where mains voltage, gas, a hot oven cavity, water, or a sealed component is involved, and hand the rest to a qualified technician.

  1. Check the food — if the freezer contents are still hard-frozen they are fine; refreeze or discard partly thawed items using safe-food guidance.
  2. Press MEASURED FILL, then Confirm, to clear the PO alert.
  3. Confirm the refrigerator is plugged in firmly and the breaker is on.
  4. If PO returns when there has been no power loss, the cause of the warming should be diagnosed rather than just cleared.

Parts a technician may replace

Depending on what the diagnosis shows, a technician may inspect, test, or replace the control board, defrost heater, defrost thermostat, compressor, and door gasket. The correct part for your Amana refrigerator is matched from the model and serial number, and genuine OEM components are fitted through trusted parts suppliers rather than generic substitutes so that performance, safety, and the appliance’s long working life are all protected. Confirming the failed part before ordering avoids replacing more than the fault actually requires.

When to call a technician

A single PO after an outage needs no service — but PO that keeps returning with stable power points to a defrost or cooling fault a technician should diagnose. When the fix calls for trained service, you can schedule an appointment and an experienced, skilled technician will diagnose and repair it.

As an independent repair service we are not affiliated with the manufacturer, and we work only with experienced, skilled technicians and genuine OEM parts from trusted parts suppliers, with our workmanship backed by a 30-day labor warranty. This condition is rated Low severity, so there is no emergency — but if the same PO keeps returning after the checks above, a technician should confirm the cause before any part is replaced. When you book, have your Amana refrigerator model and serial number ready — they are usually on a label inside the door, behind a drawer, or on the side panel — so the right part for your exact build can be matched before the visit and the PO condition resolved in as few trips as possible.

Browse other Amana Refrigerator error-code guides, read about Amana Refrigerator repair, look up your unit in the Amana models reference, or schedule an appointment. Or see the related Door Ajar / Door Open alarm. For full manufacturer specifications and model lookup, visit the manufacturer at amana.com.

Can't resolve Refrigerator PO? Our experienced technicians diagnose and repair every Amana refrigerator — current production, discontinued, and legacy units. Schedule service or call us for expert help.

F — Get started

Can't resolve
Refrigerator PO?

Book an experienced Amana technician. On-site diagnostics, genuine parts, 30-day labor warranty.