An Amana oven igniter not working is a common reason a gas oven will not light, but you cannot confirm it safely yourself. The igniter sits behind the floor of the oven, where reaching it means removing a panel and working near the gas supply, and that is a technician’s job. What you can do is rule out the simple things, such as settings and the door, and then stop. If you ever smell gas, do not turn anything on or off, leave the house and call your gas utility or 911 from outside.
What does the oven igniter do on an Amana gas range?
A gas oven needs something to light the gas. Many gas ovens use an electric igniter for that job, a part that heats up, often to a glow, and then lets the gas burner light. If it does not heat properly, the oven does not light. Seeing it, though, means looking under the oven floor, and that is not something to do yourself. Our site does not describe the oven igniter on Amana ranges in detail, so we will not claim to know the exact design of yours. What our guides do say is that each Sealed Burner on the cooktop lights from an electric spark igniter, that a burner problem is diagnosed by symptom, and that the gas cooktop has no code table at all. For how your oven lights, read the owner’s manual.
This is why a gas oven that does not heat can have a different cause from an electric oven that does not heat, and why our Amana range oven not heating guide covers the electric side’s sensor and element codes separately.
What does an igniter that is not working look like?
The signs you can see from the front are simple. You set the oven to bake, wait and nothing heats. The oven stays cold, or it warms only a little. The oven display may show the temperature rising slowly or not at all. The cooktop burners may work normally, which is useful, because it tells you the gas supply to the range is on and that the problem is specific to the oven.
You may also hear a click or a hum from the oven without a flame. Do not open the door to look for a flame, and do not hold your face near the door. If you smell gas at any point, treat it as an emergency.
What can you check safely?
Do these checks only if you smell no gas at all. If there is any smell of gas, skip the list, do not touch switches or breakers, and follow the gas steps in this guide.
- Confirm that the oven is set to bake and that it is not in a delayed-start, Sabbath Mode or low Warm Hold setting. Our oven-not-heating guide lists these as settings to rule out.
- Confirm the oven door is closing fully and that the Oven Lockout is off.
- Think about whether the cooktop burners have been lighting normally in ordinary use. That tells you the range has power and gas, and that the trouble is specific to the oven. Do not experiment with the burners to find out. If the cooktop is also misbehaving, see Amana gas range burner won’t light.
- If the oven did not heat when you set it to bake the normal way, treat that as the symptom and stop. Do not make test attempts to light it, and do not keep retrying.
The reason to stop is safety. Repeated attempts to light a gas appliance can let unburned gas collect. Let a technician find out why it does not light.

What should you never do?
Do not remove the oven floor or the lower panel to find the igniter. Do not touch the igniter, because it is fragile and the parts around it are connected to the gas and electrical supply. Do not light the oven with a match or a lighter, and do not use another source of flame. Do not tamper with the gas line or the valve, and do not test for leaks with soapy water or any other home method. Our general rule is that gas connections belong to a qualified installer or technician.
If you smell gas, do not turn anything on or off, including lights and the oven; leave the house, and call your gas utility or 911 from outside. Do not go back in until you are told it is safe.
Why can’t you just replace the igniter?
The igniter is wired to the range and works together with the part that opens the gas flow, so it is not an ordinary swap, and it sits beside the gas supply. A qualified gas technician can test whether the igniter heats as it should, and can check the parts that work with it, before any part is fitted. An igniter can also look as if it works and still be too weak to do its job, and only a test shows that. If someone suggests replacing the igniter without testing it, ask them how they confirmed it.
If the range is old and has had several faults, our Amana range repair or replace guide helps you decide. A technician can tell you which it is.
When should you call a technician?
Call when the oven will not light after the checks above, when it heats only partway or when you hear clicking or humming without heat. Tell the technician your model number from the label, which burners work and what you tried. Our Amana range repair page explains how a visit works, and our Amana range maintenance guide covers the routine care that keeps a range healthy.