An amana washer clothes still wet at the end of a cycle means the washer did not drain and spin out the water — usually a drain restriction, an off-balance load, or a lid-lock fault.
Amana NTW top-load and NFW front-load washers report F#E# codes plus lettered aliases such as Sd for suds, LF for long fill, Ld for long drain, and uL for unbalanced; the official mapping is F0E2 suds, F0E3 overload, and F0E5 off-balance, and LOC or LC is the control lock, a feature rather than a fault. We start with the everyday causes you can check yourself, then explain the signs that point to a part that genuinely needs a hands-on repair.
What a amana washer clothes still wet usually means
The final spin throws water out of the clothes, but only after the washer drains and confirms the lid is locked and the load is balanced. A clogged pump filter or drain hose, an off-balance load posting uL, a lid that will not lock (F5), or a worn drive belt all leave the clothes sopping. Confirming the drain and the balance comes first.
First checks you can do
Start with the checks you can safely do yourself. Each one rules out a common, inexpensive cause, and together they resolve the majority of cases without a service visit:
- Confirm the washer drained — it cannot spin out a tub still full of water.
- Redistribute a bunched or off-balance load (uL) and run a spin.
- Clear the pump filter and check the drain hose for kinks.
- Listen for the lid lock clicking at the start of the spin.
Take these in order and confirm whether the problem has cleared before moving to the next. If you do end up needing help, having worked through them gives the technician a useful head start.
When it is a fault, not a habit
If the everyday checks above do not resolve it, the problem has likely moved from something you can adjust to a component that needs testing or replacing. These are the signs that point that way:
- It drains but never spins — a lid-lock fault (F5) or a worn belt.
- The spin is weak and slow — a drive or motor-control issue (F7 E1).
- It spins but clothes stay wet — an unbalanced load tripping the spin short.
At this point a proper diagnosis beats guesswork, since the remaining causes involve a specific part or electrical testing. An experienced technician can meter the suspect component and fit a genuine OEM part so the repair lasts.
Getting it right for the long run
If the basics here do not clear it, resist the urge to start swapping parts at random. The remaining causes usually involve a specific component that needs testing, and a confident diagnosis is what keeps the repair affordable and the appliance reliable afterward. A skilled technician can confirm the cause, fit a genuine OEM part, and stand behind the labor, which is a better outcome than guesswork. Knowing where the line falls between an easy self-fix and a real repair is the most useful thing to take from this guide.
Putting it together
Work the checks above in the order given. Most Amana washer faults of this kind clear at one of the early, owner-checkable steps; the ones that do not point to a specific part and are worth a proper diagnosis rather than guesswork. Move from the simplest cause outward, confirm each step before the next, and treat a returning code or a lingering symptom as your cue to bring in help. A little routine care afterward prevents most repeat calls, since Amana builds these washers to be dependable and easy to live with.
Related reading: Amana washer won’t spin, Amana washer won’t drain, and our washer repair service.
Book Amana washer service
If these steps do not resolve it, our experienced, independent technicians repair Amana washers with genuine OEM parts and a 30-day labor warranty. Schedule a visit, see what our washer repair service covers, or confirm your model details on the manufacturer’s site at amana.com.
