An amana wall oven f6 e1 code on an AWO6313 or AWO6317 means the oven detected an over-temperature during cooking and shut down to stay safe.
Amana single electric wall ovens (the AWO6313 and AWO6317) share the range control platform, so they report the same F#E# codes — F3 sensor, F5 door lock, F6 E1 over-temp during cook, and F9 E0 electrical or miswire — and because they are single, electric, thermal ovens there are no double-oven or gas-oven codes to read. We start with the everyday causes you can check yourself, then explain the signs that point to a part that genuinely needs a hands-on repair.
What a amana wall oven f6 e1 usually means
These single electric wall ovens share the range control platform, so F6 E1 means the cavity ran hotter than the setpoint allowed. A drifted or shorted RTD sensor feeding the control a wrong reading, a relay stuck closed holding an element on, or a wiring fault are the causes. A reset clears a one-off; a returning F6 E1 needs the sensor and the board tested.
First checks you can do
Start with the checks you can safely do yourself. Each one rules out a common, inexpensive cause, and together they resolve the majority of cases without a service visit:
- Switch the oven off at the breaker for 30 to 60 seconds, then restore power.
- Confirm the oven was not left on a very high broil for a long period.
- Note whether F6 E1 appears only during a cook cycle (the typical pattern).
- Let the cavity cool fully before retrying.
Take these in order and confirm whether the problem has cleared before moving to the next. If you do end up needing help, having worked through them gives the technician a useful head start.
Reading the Amana display for a amana wall oven f6 e1
Note any code before you act, because it narrows the diagnosis more than any other clue. A good first move for most Amana faults is a power reset: switch the appliance off at the breaker for 30 to 60 seconds, then restore power. If the code returns straight away, treat it as a real fault pointing at the named part rather than a one-off glitch. Remember Amana writes the digits F-then-E, so read F3 E1 as the third fault group with sub-code one.
- F6 E1 — over-temp during cook (the code here): a safety shutdown.
- F3 E0 / F3 E1 — oven sensor open or shorted.
- F9 E0 — electrical / miswire.
- F5 E0 / F5 E1 — door-lock fault.
Read the exact characters carefully, and ignore any lookup that does not match this list — codes from other makes do not apply here.
When it is a fault, not a habit
If the everyday checks above do not resolve it, the problem has likely moved from something you can adjust to a component that needs testing or replacing. These are the signs that point that way:
- F6 E1 returns after a reset — the RTD sensor or a stuck control relay needs replacement.
- An element glows even when off — a welded relay holding it on.
- The over-temp pairs with erratic readings — a drifting sensor.
At this point a proper diagnosis beats guesswork, since the remaining causes involve a specific part or electrical testing. An experienced technician can meter the suspect component and fit a genuine OEM part so the repair lasts.
Putting it together
Work the checks above in the order given. Most Amana wall oven faults of this kind clear at one of the early, owner-checkable steps; the ones that do not point to a specific part and are worth a proper diagnosis rather than guesswork. Move from the simplest cause outward, confirm each step before the next, and treat a returning code or a lingering symptom as your cue to bring in help. A little routine care afterward prevents most repeat calls, since Amana builds these wall ovens to be dependable and easy to live with.
Related reading: Amana wall oven not heating, Amana wall oven error-code guides, and our wall oven repair service.
Book Amana wall oven service
If these steps do not resolve it, our experienced, independent technicians repair Amana wall ovens with genuine OEM parts and a 30-day labor warranty. Schedule a visit, see what our wall oven repair service covers, or confirm your model details on the manufacturer’s site at amana.com.
